null
BDS SUSPENSION

BDS SUSPENSION BDS2104H 6" RADIUS ARM LIFT KIT WITH NX2 SHOCKS 2013-2018 RAM 2500 6.7L DIESEL 4WD

(No reviews yet) Write a Review
SKU:
BDS2104H
MPN:
BDS2104H
Shipping:
Calculated at Checkout
$2,121.59
724-785-4022

Description

Take your 2013-2018 RAM 3500 diesel powered truck to the next level by installing a 6-inch lift kit with radius arms engineered by BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy duty tubular radius arms, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features & Benefits

  • Heavy duty tubular radius arms improve strength, handling and caster control
  • Front high strength progressive rate coil springs for a great ride on any terrain
  • Front track bar relocation bracket to re-position axle
  • Forged drop pitman arm to correct steering angles
  • Front sway bar correction to maintain handling performance
  • HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
  • BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance

Recommended Tires & Wheels

(Trimming may be required)

  • 37 x 13.5 with 17 x 8 and 5.625 in. Backspace
  • 37 x 12.5 with 18 x 9 and 4.5 in. Backspace
  • 35 x 12.5 with 17 x 9 and 4.5 in. Backspace

IMPORTANT NOTES: 

  1. The carrier bearing drop is necessary for models equipped with the two-piece rear drive shaft.
  2. Some vehicles may require a rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement

Installation Guides :

012615.pdf (cloudinary.com)
122321.pdf (cloudinary.com)
 

Est. Install Time :

6-8 hrs

Difficulty Level :

Moderate

Specialty Tools Needed :

Step Drill Bit, Drill / Bit Set, Pitman Arm Puller, Welding Equipment
 
SPECIFICATION: 
  • Front Lift Method : Coil Spring
  • Rear Lift Method : Blocks
  • Shocks Included : Yes
  • Front Lift Height : 6"
  • Rear Lift Height : 5"

FITMENT: 

YearMakeModelSubmodelDrive TypeFuel TypePositionLift Height
2013 Ram 3500 ALL 4WD DIESEL ALL ALL
2014 Ram 3500 ALL 4WD DIESEL ALL ALL
2015 Ram 3500 ALL 4WD DIESEL ALL ALL
2016 Ram 3500 ALL 4WD DIESEL ALL ALL
2017 Ram 3500 ALL 4WD DIESEL ALL ALL
2018 Ram 3500 ALL 4WD DIESEL ALL ALL
 

Elevate your 2013-2018 RAM 3500 diesel truck’s performance and aesthetics with the BDS Suspension BDS2104H 6" Radius Arm Lift Kit, expertly designed for 4WD vehicles. This comprehensive lift kit offers an impressive 6-inch boost, allowing for enhanced clearance and compatibility with up to 37-inch tires. Each component is meticulously engineered to ensure exceptional handling and robustness, making it perfect for off-road adventures.

The heart of the kit features diesel-specific Pro-Ride coil springs that deliver a smooth, progressive ride over various terrains, ensuring your comfort no matter the journey. Accompanying these springs are heavy-duty tubular radius arms, crafted for superior strength and precise caster control, optimizing your truck's overall handling. A forged drop pitman arm and a track bar relocation bracket work in tandem to enhance steering geometry, ensuring a responsive driving experience.

In addition to the front components, this kit uses a high-strength fabricated lift block in the rear, paired with longer u-bolts and performance-grade NX2 Nitro or FOX 2.0 shocks to provide a balanced lift and improved off-road capability. The inclusion of a HD transmission crossmember and t-case indexing ring ensures that driveline angles are corrected for seamless operation with factory driveshafts.

Installation is straightforward, taking an estimated 6-8 hours with moderate skill level required, and a few specialty tools. Whether navigating rocky backroads or cruising city streets, the BDS2104H Lift Kit transforms your RAM into a commanding presence, combining performance, reliability, and an extensive lift, ensuring you tackle any terrain with confidence. Upgrade your truck today and enjoy the road less traveled!
View AllClose

0 Reviews

View AllClose

Related Products

Related Products