BDS SUSPENSION BDS1915FS 2.5" RADIUS ARM LIFT KIT WITH FOX 2.0 SERIES SHOCKS 2020-2022 FORD F-450 6.7L POWERSTROKE 4WD

The BDS Suspension 2.5" Radius Arm Lift Kit offers improved performance in your 2020-2022 Ford F-450 6.7L Powerstroke 4WD. These kits use full length Pro-Ride coil springs designed to improve the stance of your Super Duty while taking performance, capability, and ride quality to the next level with clearance for 35" tires. Starting of the full-length Pro-Ride dual rate coil springs provide the lift and improve overall ride quality. In place of the factory stamped steel arms this kit upgrades to heavy duty BDS radius arms. These brawny arms are built from 1-3/4" OD heavy wall tubing, fully welded with gussets for superior strength to the factory units light weight stamped steel units they are replacing.

 

The heavy wall tubular construction improves strength while correcting caster with a lower cam slot. At the frame mount, a large OE-style rubber bushing is used to better isolate NHVs and allow for quiet operation without any need for maintenance. The bushings offer superior durability and quieter operation than arms with Heims and flex joints. Also upgraded as part of these new 2.5" lift systems is a high strength replacement track bar designed to recenter the front axle with the lift installed. The new track bar is adjustable, built from 1-3/8" solid steel stock with gusseted ends and a fine thread center turnbuckle with pinch bolts. The track bar comes pre-assembled and ready to bolt into the factory location to adjust to length. At one end these use a greaseable, high-durometer polyurethane bushing and the other end a heavy-duty ball joint. This setup offers strength, comfort and quiet operation over track bars that use Heims. Rounding out the front of these kits are front brake line relocation brackets to allow enough slack in the lines to cycle the suspension offroad while the sway bar relocation brackets to correct sway bar operating angle for optimal performance without sacrificing approach angle. Available with either NX2 or Fox 2.0 Performance Series front/rear shocks.

 

In the rear, these kits use a 2" lift block and new black e-coated U-bolts to level stance while retaining the factory rear springs for ride quality and tow capacity. Take your Super Duty to the next level with a 2.5" radius arm system from BDS Suspension.

 

FEATURES:

• 2.5" Radius Arm Lift Kit

• 2" Rear Lift Blocks

• Adjustable Track Bar

• Bump Stop Extensions

• Black E-Coated U-Bolts

• Sway Bar Relocation Brackets

• Brake Line Relocation Brackets

• BDS Pro-Ride Diesel Specific Coil Springs

• Covered By BDS's "No Fine Print" Warranty

• All Necessary Mounting Hardware Included

• Choice of BDS NX2 Nitro Series or FOX 2.0 IFP Performance Shocks

SUGGESTED WHEEL & TIRE COMBINATIONS

35x12.50 w/17x9 and 4.5-5" back spacing

35x12.50 w/18x9 and 4.5-5" back spacing

35x12.50 w/20x9 and 4.5-5" back spacing

*trimming may be required

BDS1915FS

FOX 2.0 Series

 

---

 

KIT NOTES:

Designed for use on diesel models but can be installed on gas model trucks (will achieve an additional 1/2" front ride height).

Larger tires on stock wheels are not recommended due to brake line clearance required. Use recommended specifications listed in tire and wheel fitment section.

Installation requires a torque wrench capable of 405 ft-lbs.

Wheel/Tire Specs:

Max Tire Size: 35x12.50

Front Wheel: 20x8.25, 8.76" BS

Rear Outer: 20x8.25, -3.33" BS

Rear Inner: 20x8.25, 9.11" BS

 

KIT CONTENTS:

(1) BDS013207 - 2020-2022 Ford F-450 4wd 2" Rear Block Kit

(1) BDS013263 - 2020-2022 Ford F-450 Super Duty 4wd 2.5" Front Box Kit

(1) BDS033251 - 2005-2022 Ford Super Duty 2.5" Coil Spring Box Kit, Front Diesel, Pair

(1) BDS123251 - 2005-2022 Ford F250/F350 Radius Arm Kit, Pair

(2) FOX98224710 - Fox 2.0 Shock 23.27 x 14.65 x 2- S50/EB1

(2) FOX98224717 - Fox 2.0 Shock 30.05 x 18.45 x 2- EB1/EB1

 

VEHICLE FITMENT

Experience unmatched performance and style with the BDS Suspension BDS1915FS 2.5" Radius Arm Lift Kit designed specifically for the 2020-2022 Ford F-450 6.7L Powerstroke 4WD. This premium lift kit elevates your truck by 2.5 inches, thanks to the full-length Pro-Ride coil springs, allowing for the installation of larger 35" tires while enhancing ride quality and stance.

The upgrade from factory stamped steel arms to robust heavy-duty radius arms significantly improves durability and performance. Constructed from 1-3/4" OD heavy wall tubing, these fully welded arms feature additional gussets for reinforced strength, while the redesigned lower cam slot corrects caster alignment. Enhanced with large OE-style rubber bushings, the kit effectively isolates noise, vibration, and harshness, providing a smoother, quieter ride.

The innovative design is complemented by an adjustable high-strength track bar, which is constructed from 1-3/8" solid steel stock. This ensures precise recentering of the front axle, complemented by greaseable, high-durometer polyurethane bushings and a heavy-duty ball joint for optimal functionality and comfort.

For added performance, the lift kit includes brake line relocation and sway bar relocation brackets, allowing for unencumbered off-road suspension cycling without compromising approach angles. The rear of the vehicle maintains its balance with 2" lift blocks and durable black e-coated U-bolts that retain factory springs for sustained ride quality and towing capacity.

Choose from either BDS's NX2 Nitro Series or FOX 2.0 Performance Series shocks to elevate your driving experience. Backed by BDS's "No Fine Print" warranty, all necessary mounting hardware is included for a seamless installation. Transform your Ford F-450 with the BDS Suspension 2.5" Radius Arm Lift Kit and conquer any terrain with confidence.