null
BDS SUSPENSION

BDS SUSPENSION BDS1792H 4" RADIUS ARM LIFT KIT WITH NX2 SHOCKS 2013-2018 RAM 3500 6.7L DIESEL 4WD

(No reviews yet) Write a Review
SKU:
BDS1792H
MPN:
BDS1792H
Shipping:
Calculated at Checkout
$1,755.60
724-785-4022

Description

Upgrade the ride and style of your 2013-2018 RAM 3500 diesel powered truck equipped with factory rear air ride by installing this 4-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy duty radius arms, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, heavy duty air bag spacer, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features & Benefits

  • Heavy duty tubular radius arms improve strength, handling and caster control
  • Front high strength progressive rate coil springs for a great ride on any terrain
  • Front track bar relocation bracket to re-position axle
  • Forged drop pitman arm to correct steering angles
  • Front sway bar correction to maintain handling performance
  • BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance

Recommended Tires & Wheels

(Trimming may be required)

  • 37 x 12.5 with 20 x 9 and 5.625 in. Backspace
  • 35 x 12.5 with 20 x 9 and 4.5 in. Backspace

IMPORTANT NOTES: 

  1. The carrier bearing drop is necessary for models equipped with two piece rear drive shaft.
  2. Some vehicles may require rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement.

Est. Install Time :

6-8 hrs

Difficulty Level :

Moderate

Specialty Tools Needed :

Drill / Bit Set, Pitman Arm Puller, Welding Equipment
 
SPECIFICATION: 
  • Front Lift Method : Coil Spring
  • Rear Lift Method : Blocks
  • Shocks Included : Yes
  • Front Lift Height : 4"
  • Rear Lift Height : 3"
YearMakeModelSubmodelDrive TypeFuel TypePositionLift Height
2013 Ram 3500 ALL 4WD DIESEL ALL ALL
2014 Ram 3500 ALL 4WD DIESEL ALL ALL
2015 Ram 3500 ALL 4WD DIESEL ALL ALL
2016 Ram 3500 ALL 4WD DIESEL ALL ALL
2017 Ram 3500 ALL 4WD DIESEL ALL ALL
2018 Ram 3500 ALL 4WD DIESEL ALL ALL
 

Transform your 2013-2018 RAM 3500 diesel truck’s performance and aesthetics with the BDS Suspension BDS1792H 4" Radius Arm Lift Kit, specifically crafted for 4WD models equipped with factory rear air ride. This meticulously engineered lift kit elevates your rig by four inches, allowing for the installation of larger tires up to 35 inches, enhancing both ground clearance and off-road capability.

The front of the kit features diesel-specific Pro-Ride coil springs designed for a smooth, progressive ride across various terrains. Heavy-duty tubular radius arms replace the factory stamped versions, providing enhanced strength, improved handling, and caster adjustments for a range of lift heights. The forged drop pitman arm optimizes steering geometry while a heavy-duty track bar drop bracket repositions the axle, ensuring aligned operation throughout suspension travel.

In the rear, the kit employs high-strength fabricated lift blocks paired with airbag spacers and NX2 or FOX 2.0 Nitro shocks for an upgraded performance and comfort. The kit includes all necessary components such as bump stops, brake line brackets, and sway bar correction to maintain factory-like handling and stability.

Installation is straightforward, requiring moderate skill and an estimated time of 6-8 hours. Specialty tools such as a drill/bit set, pitman arm puller, and welding equipment will be needed, ensuring a perfect fit and finish.

With its robust construction and thoughtful engineering, the BDS1792H Lift Kit elevates not just your truck's height but also its performance, making it an essential upgrade for serious off-roading enthusiasts looking to enhance their RAM 3500 experience while retaining a smooth and controlled ride.
View AllClose

0 Reviews

View AllClose

Related Products

Related Products