null
BDS SUSPENSION

BDS SUSPENSION BDS1719H 4" RADIUS ARM LIFT KIT WITH NX2 SHOCKS 2019-2022 RAM 3500 6.7L DIESEL 4WD

(No reviews yet) Write a Review
SKU:
BDS1719H
MPN:
BDS1719H
Shipping:
Calculated at Checkout
$2,248.93
724-785-4022

Description

Take your factory rear air bag equipped RAM 3500 diesel powered truck to the next level with this 4-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

At this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength fabricated lift block, heavy duty air bag spacers, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features & Benefits

  • Heavy duty tubular radius arms improve strength, handling and caster control
  • Front high strength progressive rate coil springs for a great ride on any terrain
  • Front track bar relocation bracket to re-position axle
  • Forged drop pitman arm to correct steering angles
  • Front sway bar correction to maintain handling performance
  • HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
  • BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance

Recommended Tires & Wheels

(Trimming may be required)

  • 35 x 12.5 with 20 x 9 and 4.5 in. Backspace
  • 37 x 12.5 with 20 x 9 and 5.625 in. Backspace

Shock Option

NX2 Nitro Series

  • Nitrogen-charged
  • Twin-tube design
  • 10-stage velocity-sensitive valving
  • Dual-welded ends for increased strength
  • 1-3/8-inch high-flow piston
  • Self-lubricating seals
  • Silver powder coat finish

FOX 2.0 Performance Series

  • 2-inch Impact extruded aluminum body
  • Internal floating piston (IFP) monotube design
  • CNC machined 6061-T6 aluminum mounting ends
  • Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting clear anodized finish

Indexing Ring Option

6 Bolt Indexing Ring

  • Kits come standard with 6-Bolt indexing ring kit.

8 Bolt Indexing Ring

  • Ram has an optional Aisin heavy-duty 6 speed transmission available in the 3500 trucks that utilize a different transfer case mounting bolt pattern (8-bolt).
  • The 8-bolt kit also includes an internal shaft seal extension and new shaft seal.

IMPORTANT NOTES: 

  1. Fits OE equipped air ride systems only
  2. Dually with 8-bolt Transmission (Aisin), require BDS122409 Def Relocation Kit
  3. Mega Cab’s with 8-bolt Transmission (Aisin), require BDS122409 Def Relocation Kit
  4. Vehicles equipped with a Manual T-case requires BDS122423 Manual transfer case shifter extension
  5. Vehicles equipped with a 2-piece rear drive shaft (carrier bearing), require BDS122406 Carrier bearing drop.

 

Est. Install Time :

6-8 hrs

 

Difficulty Level :

Moderate

 

Specialty Tools Needed :

Pitman Arm Puller
 
SPECIFICATION: 
  • Front Lift Method : Coil Spring
  • Rear Lift Method : Blocks
  • Shocks Included : Yes
  • Front Lift Height : 4"
  • Rear Lift Height : 3"
YearMakeModelSubmodelDrive TypeFuel TypePositionLift Height
2019 Ram 3500 ALL 4WD DIESEL ALL ALL
2020 Ram 3500 ALL 4WD DIESEL ALL ALL
2021 Ram 3500 ALL 4WD DIESEL ALL ALL
2022 Ram 3500 ALL 4WD DIESEL ALL ALL
2023 Ram 3500 ALL 4WD DIESEL ALL ALL
2024 Ram 3500 Big Horn 4WD DIESEL ALL ALL
2024 Ram 3500 Big Horn 4WD DIESEL ALL ALL
2024 Ram 3500 Big Horn 4WD DIESEL ALL ALL
2024 Ram 3500 Laramie 4WD DIESEL ALL ALL
2024 Ram 3500 Laramie 4WD DIESEL ALL ALL
2024 Ram 3500 Limited 4WD DIESEL ALL ALL
2024 Ram 3500 Limited 4WD DIESEL ALL ALL
2024 Ram 3500 Limited Longhorn 4WD DIESEL ALL ALL
2024 Ram 3500 Limited Longhorn 4WD DIESEL ALL ALL
2024 Ram 3500 Tradesman 4WD DIESEL ALL ALL
2024 Ram 3500 Tradesman 4WD DIESEL ALL ALL


Elevate your driving experience with the BDS SUSPENSION BDS1719H 4" Radius Arm Lift Kit, specifically engineered for 2019-2022 RAM 3500 6.7L Diesel 4WD models equipped with factory rear air bags. This comprehensive lift kit transforms your truck's stance and capabilities, allowing clearance for up to 35-inch tires while enhancing suspension performance across various terrains.

This lift kit includes diesel-specific Pro-Ride coil springs that provide a smooth, progressive ride, ensuring comfort even on rugged off-road paths. The heavy-duty tubular radius arms replace the factory components, boasting improved strength and handling for a sure-footed experience. A precision-engineered forged drop pitman arm and track bar relocation bracket align steering geometry, promoting enhanced control and stability while maintaining factory drive shaft usage through an innovative indexing system.

Adding to the kit's versatility, the rear features robust fabricated lift blocks paired with reliable NX2 or FOX 2.0 performance shocks, expertly designed to absorb impacts and elevate overall ride quality. With sway bar relocation and brake line brackets included, this suspension lift kit prioritizes both performance and safety.

The installation process is straightforward, with an estimated time of 6-8 hours and moderate difficulty—ideal for those familiar with vehicle modifications. Specialty tools such as a Pitman Arm Puller are required for complete installation.

Transform your RAM 3500 into an off-road beast with this thoroughly designed lift kit that encapsulates both form and function, making every drive not just a journey, but an adventure. Choose between NX2 Nitro or FOX 2.0 shocks for a custom ride experience tailored to your needs and enjoy unmatched performance on or off the road.
View AllClose

0 Reviews

View AllClose

Related Products

Related Products