null
BDS SUSPENSION

BDS SUSPENSION BDS1574FS 6" 4-LINK LIFT KIT WITH FOX 2.0 SERIES SHOCKS 2020-2022 FORD F-350 6.7L POWERSTROKE 4WD DRW

(No reviews yet) Write a Review
SKU:
BDS1574FS
MPN:
BDS1574FS
Shipping:
Calculated at Checkout
$2,937.50
724-785-4022

Description

Take your dual rear wheel "DRW" Ford F350 Super Duty diesel truck to the next level with this 6-inch 4-Link lift kit from BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your dually Ford truck up right with clearance for up to 38" tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, 4-Link control arm conversion, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets, and custom-tuned nitrogen charged shocks.

At this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength ¼-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

T-Case Indexing

At this height, driveline adjustments are necessary to allow the use of the factory driveshafts so a precision-built transfer-case indexing ring featuring ARP-studs can clock the transfer case and improve the front driveline operating angle. Additionally, a high clearance transmission crossmember supplied to allow sufficient clearance.

Features & Benefits

  • Easy, 100% Bolt-on installation
  • Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
  • Heavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel
  • Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
  • Fabricated steel blocks provide level stance from front to rear
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road

Recommended Tires & Wheels

(Trimming may be required)

  • 38 x 13.5 with 20 x 9 and 5 in. Backspace
  • 38 x 13.5 with 20 x 10 and 5 in. Backspace

Shock Option

NX2 Nitro Series

  • Nitrogen-charged
  • Twin-tube design
  • 10-stage velocity-sensitive valving
  • Dual-welded ends for increased strength
  • 1-3/8-inch high-flow piston
  • Self-lubricating seals
  • Silver powder coat finish

FOX 2.0 Performance Series

  • 2-inch Impact extruded aluminum body
  • Internal floating piston (IFP) monotube design
  • CNC machined 6061-T6 aluminum mounting ends
  • Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting clear anodized finish

FOX 2.5 Performance Elite Series

  • Increased off-road capabilities
  • Easily adjust your shock for terrain, load and speed
  • 2.5-inch Impact extruded aluminum body
  • Massive 7/8-inch hard chrome plated heat-treated alloy steel shaft
  • External reservoir design separates shock oil from the high-pressure nitrogen
  • DSC - Dual Speed Compression Adjuster comes standard
  • Fully serviceable for a lifetime of use
  • 1-year Manufacturer's Warranty

IMPORTANT NOTES: 

  1. Dually Models Only
  2. The transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.
  3. If equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402).
  4. 38 x 13.50 tires may require minor trimming.
  5. The indexing ring is not designed for manual shift transfer case models. Modification of the shift cable mount will be required.

Est. Install Time :

6-8 hrs

Difficulty Level :

Difficult

Specialty Tools Needed :

30mm Socket, Basic Hand Tools, Drill / Bit Set, Jack / Jack Stands, Pitman Arm Puller, Reciprocating Saw
 
 
SPECIFICATION:
  • Front Lift Method : Coil Spring
  • Rear Lift Method : Block
  • Shocks Included : Yes
  • Front Lift Height : 6"
  • Rear Lift Height : 5"

 


YearMakeModelSubmodelDrive TypeFuel TypePositionLift Height
2020 Ford F-350 Super Duty King Ranch 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty Lariat 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty Limited 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty Platinum 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty XL 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty XLT 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty King Ranch 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty Lariat 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty Limited 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty Platinum 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty XL 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty XLT 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty King Ranch 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty Lariat 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty Limited 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty Platinum 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty XL 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty XLT 4WD DIESEL ALL ALL

Elevate your 2020-2022 Ford F-350 Super Duty dually truck's performance and aesthetic with the BDS SUSPENSION BDS1574FS 6" 4-Link Lift Kit, meticulously designed for 6.7L Powerstroke 4WD models. This comprehensive lift kit enhances both stance and capability, granting clearance for up to 38-inch tires and transforming your truck into an off-road powerhouse.

The kit includes diesel-specific Pro-Ride coil springs and a robust 4-link control arm conversion, delivering optimized suspension geometry that enhances handling, stability, and strength. Essential components like a forged drop pitman arm, track bar bracket, and sway bar relocation kit are included to maintain steering correction and properly align your vehicle's dynamics. High-clearance brake line brackets ensure safety and performance even on the toughest terrains.

To accommodate the lift height, the inclusion of a precise indexing ring and a high-strength transmission crossmember allows the seamless use of factory front driveshafts. In the rear, the fabrications include heavy-duty lift blocks, upgraded u-bolts, and the option for either NX2 Nitro or FOX Performance shocks, providing unparalleled control and ride comfort.

Installation is straightforward with a purely bolt-on process, though it requires specialized tools and detailed attention, estimated at 6-8 hours. The kit is designed for dually models only and offers specific functionality with diesel engines, making it the ideal choice for serious off-road enthusiasts.

Choose between FOX 2.0 Performance Series shocks for maximum performance or the NX2 Nitro Series for a balanced blend of comfort and control. Enhance your Ford F-350 experience with the BDS 6" 4-Link Lift Kit—a perfect upgrade for those seeking to tackle any challenge on or off the road.
View AllClose

0 Reviews

View AllClose

Related Products

Related Products