null
BDS SUSPENSION

BDS SUSPENSION BDS1571FS 6" 4-LINK LIFT KIT 2020-2022 FORD F-250/350 6.7L POWERSTROKE 4WD

(No reviews yet) Write a Review
SKU:
BDS1571FS
MPN:
BDS1571FS
Shipping:
Calculated at Checkout
$2,958.50
724-785-4022

Description

Take your Ford Super Duty diesel truck to the next level with this 7-inch 4-Link lift kit from BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 38" tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, 4-Link control arm conversion, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets, and custom-tuned nitrogen charged shocks.

At this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.

 

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength ¼-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

T-Case Indexing

At this height, driveline adjustments are necessary to allow the use of the factory driveshafts so a precision-built transfer-case indexing ring featuring ARP-studs can clock the transfer case and improve the front driveline operating angle. Additionally, a high clearance transmission crossmember supplied to allow sufficient clearance.

Features & Benefits

  • Easy, 100% Bolt-on installation
  • Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
  • Heavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel
  • Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
  • Fabricated steel blocks provide level stance from front to rear
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road

Recommended Tires & Wheels

(Trimming may be required)

  • 38 x 13.5 with 17 x 10 and 5 in. Backspace
  • 38 x 13.5 with 20 x 9 and 5 in. Backspace
  • 38 x 13.5 with 20 x 10 and 5 in. Backspace

Shock Option

NX2 Nitro Series

  • Nitrogen-charged
  • Twin-tube design
  • 10-stage velocity-sensitive valving
  • Dual-welded ends for increased strength
  • 1-3/8-inch high-flow piston
  • Self-lubricating seals
  • Silver powder coat finish

FOX 2.0 Performance Series

  • 2-inch Impact extruded aluminum body
  • Internal floating piston (IFP) monotube design
  • CNC machined 6061-T6 aluminum mounting ends
  • Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting clear anodized finish

FOX 2.5 Performance Elite Series

  • Increased off-road capabilities
  • Easily adjust your shock for terrain, load and speed
  • 2.5-inch Impact extruded aluminum body
  • Massive 7/8-inch hard chrome plated heat-treated alloy steel shaft
  • External reservoir design separates shock oil from the high-pressure nitrogen
  • DSC - Dual Speed Compression Adjuster comes standard
  • Fully serviceable for a lifetime of use
  • 1-year Manufacturer's Warranty

IMPORTANT NOTES: 

  1. Ford recommends the replacement of the pitman arm nut after each time it has been removed.
  2. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper.
  3. If your truck is equipped with a factory rear sway bar add: BDS123808
  4. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.
  5. Due to the taller factory ride height, Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models.
  6. Larger tires on the stock wheel are not recommended due to the brake line clearance required. Use recommended specs listed in the wheel and tire fitment section.
  7. The indexing ring is only compatible with 10-speed transmission trucks. Please verify your truck's equipment before installing it. The transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.
  8. Indexing Ring has NOT been designed to work on manual shift transfer case models. Modification of the shift cable mount will be required.
  9. Installation requires a torque wrench capable of 405 ft-lbs.

Est. Install Time :

6-8 hrs

Difficulty Level :

Difficult

Specialty Tools Needed :

30mm Socket, 40mm Socket, Basic Hand Tools, Cut-off Tool, Drill / Bit Set, Jack / Jack Stands, Pitman Arm Puller
 
SPECIFICATION: 
  • Front Lift Method : Coil Spring
  • Rear Lift Method : Block
  • Shocks Included : Yes
  • Front Lift Height : 7"
  • Rear Lift Height : 6"

FITMENT: 

YearMakeModelSubmodelDrive TypeFuel TypePositionLift Height
2020 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty King Ranch 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty Lariat 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty Limited 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty Platinum 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty XL 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty XLT 4WD DIESEL ALL ALL
2021 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty King Ranch 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty Lariat 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty Limited 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty Platinum 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty XL 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty XLT 4WD DIESEL ALL ALL
2022 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty King Ranch 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty Lariat 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty Limited 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty Platinum 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty XL 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty XLT 4WD DIESEL ALL ALL

Transform your Ford Super Duty diesel truck into an unstoppable powerhouse with the BDS SUSPENSION BDS1571FS 6" 4-Link Lift Kit, designed for 2020-2022 Ford F-250/350 6.7L Powerstroke 4WD models. This comprehensive lift kit elevates your truck's performance, stance, and off-road capability, providing ample clearance for up to 38" tires.

The package features high-strength, diesel-specific Pro-Ride coil springs that are specially tuned for optimal ride quality across diverse terrains. The innovative 4-Link control arm conversion enhances suspension geometry, delivering superior handling and stability while mitigating caster changes. With heavy-duty forged drop pitman arms and a precision-engineered track bar bracket, steering integrity is maintained, ensuring you tackle any trail with confidence.

A key aspect of this kit is the advanced transfer case indexing system, necessary for utilizing factory front driveshafts at this height. Included are high-clearance transmission crossmembers and precision-built indexing rings, integrating seamless performance with rugged durability. The rear suspension is fortified with fabricated lift blocks, longer u-bolts, adjustable brake line brackets, and a choice between NX2 Nitro or FOX Performance shocks, both designed for top-tier handling.

Installation is straightforward with a completely bolt-on design, though a torque wrench capable of 405 ft-lbs is essential. Recommended tire and wheel setups include 38 x 13.5 tires, ensuring you achieve the perfect aggressive look with outstanding road grip.

This lift kit not only elevates your vehicle physically and visually but also enhances its overall capability on and off the road. With exemplary construction and comprehensive installation support, elevate your driving experience to remarkable heights. Embrace the road ahead with the BDS SUSPENSION BDS1571FS lift kit, where performance meets precision engineering.
View AllClose

0 Reviews

View AllClose

Related Products

Related Products