null
BDS SUSPENSION

BDS SUSPENSION BDS1569FS 4" COILOVER 4-LINK LIFT KIT 2020-2022 FORD F-250/350 6.7L POWERSTROKE 4WD

(No reviews yet) Write a Review
SKU:
BDS1569FS
MPN:
BDS1569FS
Shipping:
Calculated at Checkout
  • BDS SUSPENSION BDS1569FS 4" COILOVER 4-LINK LIFT KIT 2020-2022 FORD F-250/350 6.7L POWERSTROKE 4WD
  • BDS SUSPENSION BDS1569FS 4" COILOVER 4-LINK LIFT KIT 2020-2022 FORD F-250/350 6.7L POWERSTROKE 4WD
$5,303.73
724-785-4022

Description

Maximize the capability of your Ford Super Duty diesel powered truck with this 5-inch lift kit with 4-Link and FOX 2.5 Performance Elite Coil-over conversion from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires.

Up front the lift kit includes diesel-specific FOX 2.5 coil-over shocks, 4-link control arms with conversion brackets, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, and brake line brackets.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of FOX Performance shocks.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength ¼-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

FOX Performance Elite Coil-Over

FOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features & Benefits

  • FOX 2.5 Coil-Over mounts in factory coil bucket location
  • Adds additional secondary FOX 2.0 shock for max performance
  • Eibach coil springs ride smooth through the roughest terrain
  • Heavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel
  • Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
  • Fabricated steel blocks provide level stance from front to rear
  • FOX shocks are fully serviceable and resistant to corrosion and harsh environments.

Recommended Tires & Wheels

(Trimming may be required)

  • 37 x 12.5 with 17 x 9 and 5 in. Backspace
  • 37 x 12.5 with 18 x 9 and 5 in. Backspace
  • 37 x 12.5 with 20 x 9 and 5 in. Backspace

Rear Lift Option

Block Kit

  • Included in the base system.
  • Made of cast iron for high strength.
  • Designed to provide correct pinion angles.

Leaf Springs

  • Eliminates any need for a lift block.
  • Reduces axle wrap and creates a more controlled and stable feel.
  • Multi-leaf progressive design for a smooth ride.
  • Maintains factory payload weight ratings.

Auxiliary Front and Rear Shock Option

FOX 2.0 Performance Series

  • 2-inch Impact extruded aluminum body
  • Internal floating piston (IFP) monotube design
  • CNC machined 6061-T6 aluminum mounting ends
  • Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting clear anodized finish

IMPORTANT NOTES: 

  1. Ford recommends the replacement of the pitman arm nut after each time it has been removed.
  2. If installed on a truck with a top-mounted overload spring, with an overload spacer block taller than 1-1/8" UBT4027 (Qty: 4) is required.
  3. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper.
  4. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.
  5. Due to the taller factory ride height, Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models.
  6. Larger tires on the stock wheel are not recommended due to the brake line clearance required. Use recommended specs listed in the wheel and tire fitment section.
  7. Minor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups.
  8. Installation requires a torque wrench capable of 405 ft-lbs.
  9. Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends having this performed prior to installing the lift.

INSTALLATION: 

Est. Install Time :

8-10 hrs

Difficulty Level :

Difficult

Specialty Tools Needed :

30mm Socket, Cut Off Wheel or Equiv., Pitman Arm Puller, Reciprocating Saw
 
SPECIFICATION: 
  • Front Lift Method : Coil-Over
  • Rear Lift Method : Leaf Spring
  • Shocks Included : Yes
  • Front Lift Height : 5"
  • Rear Lift Height : 4"

FITMENT: 

YearMakeModelSubmodelDrive TypeFuel TypePositionLift Height
2020 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty King Ranch 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty Lariat 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty Limited 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty Platinum 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty XL 4WD DIESEL ALL ALL
2020 Ford F-350 Super Duty XLT 4WD DIESEL ALL ALL
2021 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty King Ranch 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty Lariat 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty Limited 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty Platinum 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty XL 4WD DIESEL ALL ALL
2021 Ford F-350 Super Duty XLT 4WD DIESEL ALL ALL
2022 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty King Ranch 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty Lariat 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty Limited 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty Platinum 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty XL 4WD DIESEL ALL ALL
2022 Ford F-350 Super Duty XLT 4WD DIESEL ALL ALL

Transform your 2020-2022 Ford F-250 or F-350 Super Duty with the BDS SUSPENSION BDS1569FS 4" Coilover 4-Link Lift Kit, designed to elevate both performance and aesthetics. This comprehensive lift kit allows for a striking 5-inch boost in front height and 4 inches in the rear, accommodating up to 37" tires for that commanding presence on or off the road.

At the forefront of this kit are the diesel-specific FOX 2.5 Performance Elite coil-over shocks. These shocks are carefully engineered to enhance ride quality, featuring a remote reservoir that provides extra fluid capacity for improved cooling and performance in rugged terrains. Built to endure tough conditions, they incorporate advanced technology to ensure superior handling and comfort.

The innovative 4-Link conversion redefines your truck's suspension geometry, utilizing high-strength ¼-inch steel brackets for enhanced stability, strength, and handling. This upgrade minimizes caster change during wheel travel and optimizes axle positioning, enhancing your truck's overall capabilities.

When it comes to steering, the BDS1569FS kit includes a forged drop pitman arm with a track bar bracket, ensuring proper alignment and responsiveness throughout suspension travel. Additionally, the fabricated lift blocks in the rear maintain a level stance while elevating performance.

Installation is straightforward, though it does require moderate expertise and an estimated 8-10 hours of labor. This kit is ideal for truck enthusiasts seeking durability and performance without compromising ride comfort. Recommended tires for optimal fitment include 37x12.5 sizes on various wheel offsets. Whether tackling the rocky trails or cruising on highways, the BDS SUSPENSION lift kit empowers your Super Duty to take on any challenge with confidence and style.
View AllClose

0 Reviews

View AllClose

Related Products

Related Products