BDS SUSPENSION
BDS SUSPENSION 1538H 4" 4-LINK LIFT KIT 2017-2019 FORD F-250/350 6.7L POWERSTROKE 4WD
- SKU:
- BDS1538H
- MPN:
- BDS1538H
- Shipping:
- Calculated at Checkout
Description
Raise the height of your 2017-2019 Ford F250 and F350 Super Duty diesel powered truck with this 4-inch lift kit and 4-Link conversion from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires.
Up front the lift kit includes diesel-specific Pro-Ride coil springs, 4-link control arms with conversion brackets, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.
In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.
4-Link Conversion
Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength ¼-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.
Pro-Ride Coil Springs
A pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.
Steering Correction
To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.
Features & Benefits
- Easy, 100% Bolt-on installation
- Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
- Heavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel
- Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
- Fabricated steel blocks provide level stance from front to rear
- Standard NX2 Nitro shocks with vehicle-specific valving for better control
- Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
Recommended Tires & Wheels
(Trimming may be required)
- 37 x 12.5 with 17 x 9 and 5 in. Backspace
- 37 x 12.5 with 18 x 9 and 5 in. Backspace
- 37 x 12.5 with 20 x 9 and 5 in. Backspace
Rear Lift Option
5 Inch Block
Some F250/350 factory options increase the main leaf pack count from 2 to 3 leaf's (this is for top overload options only). Be sure to verify which factory leaf spring configuration your vehicle has and choose the appropriate option.
Leaf Springs
- Reduces axle wrap and creates a more controlled and stable feel
- Multi-leaf progressive design for smooth ride
- Maintains factory payload weight ratings
- Anti-friction pads provide a smooth and quiet ride
Shock Option
NX2 Nitro Series
- Nitrogen-charged
- Twin-tube design
- 10-stage velocity-sensitive valving
- Dual-welded ends for increased strength
- 1-3/8-inch high-flow piston
- Self-lubricating seals
- Silver powder coat finish
FOX 2.0 Performance Series
- 2-inch Impact extruded aluminum body
- Internal floating piston (IFP) monotube design
- CNC machined 6061-T6 aluminum mounting ends
- Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
- Race-developed high-flow piston design
- Application-specific valving to maximize performance
- Long-lasting clear anodized finish
FOX 2.5 Performance Elite Series
- Increased off-road capabilities
- Easily adjust your shock for terrain, load and speed
- 2.5-inch Impact extruded aluminum body
- Massive 7/8-inch hard chrome plated heat-treated alloy steel shaft
- External reservoir design separates shock oil from the high-pressure nitrogen
- DSC - Dual Speed Compression Adjuster comes standard
- Fully serviceable for a lifetime of use
- 1-year Manufacturer's Warranty
IMPORTANT NOTES:
- If equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402)
- 37 x 12.50 tires may require minor trimming.
- Some models may be factory equipped with a 2-leaf main rear leaf spring pack and others a 3-leaf main. Be sure to order the correct option when customizing your kit.
- If your truck is equipped with a factory rear sway bar add: 123005
Est. Install Time :
8-10 hrsDifficulty Level :
DifficultSpecialty Tools Needed :
30mm Socket, Torque Wrench, Cut-off Tool, Drill / Bit Set, Jack / Jack Stands, Pitman Arm Puller- Front Lift Method : Coil Spring
- Rear Lift Method : Block
- Shocks Included : Yes
- Front Lift Height : 4"
- Rear Lift Height : 5"
FITMENT:
Year | Make | Model | Submodel | Drive Type | Fuel Type | Position | Lift Height |
---|---|---|---|---|---|---|---|
2017 | Ford | F-250 Super Duty | ALL | 4WD | DIESEL | ALL | ALL |
2017 | Ford | F-350 Super Duty | King Ranch | 4WD | DIESEL | ALL | ALL |
2017 | Ford | F-350 Super Duty | Lariat | 4WD | DIESEL | ALL | ALL |
2017 | Ford | F-350 Super Duty | Platinum | 4WD | DIESEL | ALL | ALL |
2017 | Ford | F-350 Super Duty | XL | 4WD | DIESEL | ALL | ALL |
2017 | Ford | F-350 Super Duty | XLT | 4WD | DIESEL | ALL | ALL |
2018 | Ford | F-250 Super Duty | ALL | 4WD | DIESEL | ALL | ALL |
2018 | Ford | F-350 Super Duty | King Ranch | 4WD | DIESEL | ALL | ALL |
2018 | Ford | F-350 Super Duty | Lariat | 4WD | DIESEL | ALL | ALL |
2018 | Ford | F-350 Super Duty | Limited | 4WD | DIESEL | ALL | ALL |
2018 | Ford | F-350 Super Duty | Platinum | 4WD | DIESEL | ALL | ALL |
2018 | Ford | F-350 Super Duty | XL | 4WD | DIESEL | ALL | ALL |
2018 | Ford | F-350 Super Duty | XLT | 4WD | DIESEL | ALL | ALL |
2019 | Ford | F-250 Super Duty | ALL | 4WD | DIESEL | ALL | ALL |
2019 | Ford | F-350 Super Duty | King Ranch | 4WD | DIESEL | ALL | ALL |
2019 | Ford | F-350 Super Duty | Lariat | 4WD | DIESEL | ALL | ALL |
2019 | Ford | F-350 Super Duty | Limited | 4WD | DIESEL | ALL | ALL |
2019 | Ford | F-350 Super Duty | Platinum | 4WD | DIESEL | ALL | ALL |
2019 | Ford | F-350 Super Duty | XL | 4WD | DIESEL | ALL | ALL |
2019 | Ford | F-350 Super Duty | XLT | 4WD | DIESEL | ALL | ALL |
The BDS Suspension 1538H 4" 4-Link Lift Kit is engineered for Ford F-250 and F-350 Super Duty trucks from 2017 to 2019, specifically those powered by a 6.7L Powerstroke diesel engine. This comprehensive lift kit elevates your truck by four inches, enhancing its stance, performance, and overall capability, allowing for the fitment of up to 37" tires.
This kit features diesel-specific Pro-Ride coil springs that ensure a smooth and predictable ride across a variety of terrains. The innovative 4-link conversion optimizes suspension geometry, enhancing handling characteristics with robust control arms and custom conversion brackets that retain axle positioning while minimizing caster change during wheel travel. Steering geometry is refined with a forged drop pitman arm and a track bar bracket, ensuring that your steering remains precise and responsive even after the lift.
Rear lift includes high-strength fabricated blocks alongside longer u-bolts, ensuring a level stance and exceptional stability. The kit is complemented by NX2 Nitro shocks which boast vehicle-specific valving for ultimate control; for those looking for even more performance, FOX 2.0 Performance Series shocks are available as an upgrade.
Installation is designed to be straightforward with a 100% bolt-on setup, although it is recommended for experienced DIYers due to its complexity. The extensive package is perfect for truck enthusiasts seeking to elevate not just the height of their vehicle, but its capability on and off-road.
Approximately 8-10 hours are needed for installation, and a variety of tools will be required. With the BDS Suspension 1538H lift kit, transform your Ford F-250 or F-350 into a formidable vehicle that commands attention and delivers peak performance.