BD DIESEL 1030362 68RFE PROTECT68 PRESSURE CONTROL KIT FOR 07.5-18 DODGE DODGE RAM WITH 6.7L CUMMINS

Enhance the performance of your CUMMINS 6.7L 24V transmission with the BD Diesel 1030362 68RFE ProTect68 Pressure Control Kit. Designed to provide unparalleled torque holding force, this kit ensures optimal efficiency for your vehicle. The ProTect68 Trans Pressure Control kit features a custom bonded gasket valve body separator plate and gaskets that significantly reduce cross leaks, outperforming stock and other aftermarket kits.

With a heavy-duty accumulator plate to prevent blowouts and an Electronic Pressure Control module delivering up to 250 PSI clutch apply pressure, the ProTect68 kit offers a 150% increase in holding force, preventing clutch slippage without the need for transmission pump modifications or removal. Furthermore, the controller dynamically adjusts hydraulic pressures based on turbo boost and engine load, eliminating the necessity for tuning.

Installation of the BD Diesel ProTect68 Pressure Control Kit is straightforward, taking only 2 to 3 hours to complete, with no full transmission relearn required. This kit provides a substantial power boost to a "fresh" stock transmission, enabling it to handle up to 450hp. For higher power requirements, consider upgrading to a complete BD 68RFE transmission with additional clutches and new components.

Additional features of the ProTect68 kit include an upgraded 68RFE Accumulator Plate, increased theoretical holding power, and a comprehensive set of components for installation. Backed by a 12-month, 24,000-mile warranty, this kit is a reliable and legal enhancement for your CUMMINS.

Make the most of your RAM 2500 or 3500 with the BD Diesel 1030362 68RFE ProTect68 Pressure Control Kit—unlocking the true potential of your vehicle's transmission without the need for tuning.

ProTect68 Trans Pressure Control kit delivers 150% of the torque holding force to stock transmissions like no others can. Industry leading custom bonded gasket valve body separator plate and gaskets substantially reduces cross leaks compared to stock and other aftermarket kits, even with much higher line pressures. Heavy duty accumulator plate to prevent accumulator blow-out. Electronic Pressure Control module that delivers up to 250 PSI clutch apply pressure providing 150% of the holding force prevents clutch slippage. All of this without modifying the transmission pump or removing the transmission. Controller dynamically adjusts the hydraulic apply pressures based on turbo boost/engine load. No tuning required. Installation takes 2-to-3 hours to complete without having to do a full transmission relearn since no internal tolerances have changed. A "fresh" stock transmission will have the ability to handle up to 450hp. For higher power or demands, a complete BD 68RFE transmission with additional clutches and new designed components is recommended.

• 56% more theoretical holding power
• Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
• Heavy duty accumulator plate to prevent accumulator blowout
• Pressure Control module delivers up to 250psi clutch apply pressure at full throttle
• Dynamically adjusts hydraulic apply pressures based on turbo boost/engine load
• Dynamic control ramps up the much larger sweep
• Prevent clutch slippage
• Kit includes pan gasket, 3 doughnut seals and check ball
• Installation takes 2-to-3 hours
• No full transmission relearn required - quick relearn suggested
• A "fresh" stock transmission will have the ability to handle up to 400hp-450hp
• No tuning required

• 3 Hours

Parts

• 12-Months
• 24,000 Miles

• This kit is not to be used with transmission pressure tuning. If you have transmission pressure tuning already, use part number 1030373 instead.

• This product does not require an EO in California. By nature of its design, it is legal for sale and use in all 50 states. Replacement parts included. (EMS:4)