null
WEHRLI CUSTOM FABRICATION

WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT

(No reviews yet) Write a Review
SKU:
WCF100164
MPN:
WCF100164
Shipping:
Calculated at Checkout
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
  • WEHRLI WCF100164 2007.5-2010 LMM DURAMAX HIGH FLOW 3" Y-BRIDGE KIT
$916.65

Description

This LMM 3" Y-Bridge Kit is an upgraded high flow intake kit for the 2007.5-2010 LMM 6.6L Duramax which replaces the OEM upper intake manifold supplying air to the engine intake runners. The OEM Y-bridge for these trucks is a poorly designed, slip-fit style two piece bridge with very little support and is prone to blowing apart under boost on hard working and high performance trucks creating poor drivability and decreased power. This kit is a much improved, high flow, bolt together style two piece 3" bridge which provides a secure sealing surface where the air inlet horn connects to the bridge. 3" high flow upper and lower intercooler pipes feature smooth flowing mandrel bends, CNC machined billet flanges and perfectly compliment the y-bridge to offer a full 3" tract from intercooler pipe slip connection to the engine incorporating the factory grid heater, throttle valve, and EGR connection controls. Compatible with OEM lower passenger side intercooler pipe as well as our upgraded 3.5" High Flow Passenger Side Intercooler Pipe Kit WCF100367.

Finished in your choice of custom powder colors. This product is compatible with stock trucks requiring no additional modifications, upgrades, or tuning for installation.

Pairs best with emissions compliant tuning and drop in turbochargers for optimum performance gains.

Replaces the following GM part numbers: 97363569, 97363568, 97364407, 98091149.

  • 36% Improvement in Air Flow Over Stock
  • Eliminates restrictions and known failure points in OEM design.
  • WCFab's Signature 3" Two Piece Y-Bridge
  • 3" Upper Intercooler Crossover Pipe
  • 3" Lower Intercooler Pipe
  • High Quality Silicone Boot
  • Stainless Steel T-Bolt Clamps
  • Map Sensor Seal
  • High Temp O-Ring Seals for Grid Heater and EGR
  • Y-Bridge O-Ring Flange Seals
  • New Up Pipe to EGR Gasket
  • Includes New Grid Heater Install Hardware
  • New Throttle Valve Support Bracket
  • No Tuning Required, Bolt On!
  • Compatible with stock trucks. No other modifications or upgrades necessary!
  • Custom Powder Coat Finish
  • Made in USA

POWDER COATING - CHECK OUT OUR VIDEO

 

Powder coating has quickly become one of the most popular alternatives to traditional paint coatings. This type of surface finishing uses a dry powder applied electrostatically as a coating. The part is then cured in an oven for a period of time at temperatures ranging from 380-425*F to form a solid, durable finish. Powder coating not only looks great, but it also lasts longer while providing protection from harmful corrosion. To further improve corrosion resistance for components exposed to the weather we can first apply a Zinc-Rich Base Coat primer before the final color, which offers nearly ten times the corrosion resistance of just a standard coat of powder.

 

Wehrli Custom Powder Coating is housed under the same roof as Wehrli Custom Fabrication. Including 4 state of the art spray booths for both powder and ceramic coating applications and 6 curing ovens. Exceptional quality control, preparation, and packaging is our standard operation and what we have become known for. With over 30 different colors in stock at our facility, you have many options to choose from. If you don't see one you like, Prismatic Powders has over 5000 colors to choose from! (Non-stocked colors requested it will incur an additional fee) Below is a list of what we have in stock!

 

Powder Coat
 

 

STANDARD OPTION SINGLE COAT COLORS

UPGRADED TWO COAT COLORS (ADDITIONAL FEES APPLY)

View AllClose

0 Reviews

View AllClose