Stainless Diesel 2G Swap - Air Intake Kit... this is the Air Intake Kit that we use in our 2G swap kits for common rail 5.9L & 6.7L Dodge Cummins. (2003-2010.5) Can be used with S300 / S400 turbos. Choose the correct turbo boot for your turbo.
This is made for a single turbo with a 5.00" inlet with the single turbo mounted in ***twin position*** using a 2nd gen. (center dump) style manifold.
Comes complete with:
- (1) Turbo boot
- (2) T-bolt clamps
- (1) 5.00" intake pipe
- sensor provisions, AIT/MAF as required (RAW piping)
- (1) S&B Oiled Air Filter - 5" inlet x 12" long, - power cone tip for extra flow (**oiled, unless you mention in order notes***)
Single = short pipe
Twin = taller pipe
5.9 = 1 sensor
6.7 = 2 sensors