HAMILTON CAMS
HAMILTON CAMS 07-c-002 BOLT-ON CAM RETAINER, 89-18 5.9/6.7L CUMMINS 12V/24V
(No reviews yet)
Write a Review
- SKU:
- HAM07-c-002
- MPN:
- 07-c-002
- Shipping:
- Calculated at Checkout
Description
For use with mechanically injected engines with helical cut cam gears. The bolt on retainer will ensure that the cam gear is not pushed off of the cam in high rpm, high fuel delivery situations.
Use red loc-tite and torque bolt to 44 ft-lbs
Common rail engines or engines that use straight cut or spur gears do not need this bolt on retainer.
If you use silicon instead of a gasket on the front cover, be sure to check clearance between the bolt on retainer and the front cover.
Additional Information
Vehicle Year: |
1994-2002 |
Vehicle Make: |
DODGE |
Vehicle Model: |
5.9L CUMMINS |
Part Type: |
GEAR RETAINER |
Related Products
Related Products
HAMILTON CAMS 07-C-RETAINER BOLT ON CAM RETAINER (BRONZE), 89-07 CUMMINS 5.9L 12V/24V
HAMILTON CAMS
$89.00
Factory replacement for thrust plate retainer
HAMILTON CAMS 07-C-188-220 CAST CAM 188/220-109LSA, 89-18 CUMMINS 5.9L/6.7L
HAMILTON CAMS
$649.00
188-220 .320″/.320 109LSA 101ICL This is the best cam for 2,000rpm to 4,000rpm performance
HAMILTON CAMS 07-s-004 | 24 VALVE STEEL TOOL RETAINERS | 98.5-18 CUMMINS 24V 5.9L/6.7L
HAMILTON CAMS
$99.00
If you are running over 4,500 rpm and have a cam with large lobe lift, then these retainers are a must. Over 4,500 can only be run with our #110 springs. The Hamilton Cams 07-s-004 24 valve...
HAMILTON CAMS 07-T-002 DLC COATED BILLET TAPPETS 1.45", 89-18 CUMMINS 5.9L/6.7L
HAMILTON CAMS
$699.00
1.45″ steel tappets for high rpm engines with 110# or heavier valve springs
HAMILTON CAMS 07-sc-002 VALVE SPRING COMPRESSOR TOOL, 98.5-18 5.9L/6.7L 24V
HAMILTON CAMS
$99.00
Cummins 99-Present 24 Valve Spring Compressor tool 24 Valve Spring Compressor tool Makes changing out your valve springs while in the engine very easy. Works with both stock springs and aftermarket...