null
BANKS

BANKS 25998 BOOST TUBE KIT-OEM REPLACEMENT BOOST TUBES (RED) 2010-2012 CUMMINS 6.7L 24V

(No reviews yet) Write a Review
SKU:
BAN25998
MPN:
25998
Shipping:
Calculated at Checkout
  • BANKS 25998 BOOST TUBE KIT-OEM REPLACEMENT BOOST TUBES (RED) 2010-2012 CUMMINS 6.7L 24V
  • BANKS 25998 BOOST TUBE KIT-OEM REPLACEMENT BOOST TUBES (RED) 2010-2012 CUMMINS 6.7L 24V
$409.00

Description

Increase flow area up to 65 percent over the stock boost tubes with Banks' huge 3-1/2-inch boost tubes. Stock consists of a 3-inch plastic cold side tube and a 2.75-inch metal hot side tube. Banks boost tubes are both 3-1/2-inch constant diameter mandrel bent. More air allows for more fuel which means more horsepower.

Are you running the new bad-ass Banks Monster-Ram for the 6.7L Cummins? Banks boost tubes are larger than the factory pipe and designed to work with the stock elbow or new Banks Monster-Ram (3.5 inch or 4 inch) which will improve airflow and allow the turbocharger to spool up faster.

Banks hot and cold side tubes have up to 65 percent greater flow area than stock tubes. Produced from high-quality aluminized steel, the tubes are mandrel bent and constant diameter. This allows for quicker turbo spool. Better flowing intercooler tubes improve retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our red powder-coat finish stops before the end of the tubes for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions. Spring-loaded constant tension clamps maintain a stronger grip to prevent leaks or blown boots.

Key Features

 

  • Huge increase in size and flow over stock (3.5” vs 2.75"/3”)
  • Greater cooling capacity
  • Lower EGTs
  • Mandrel-bent aluminized steel construction
  • Constant diameter tubing for the best flow
  • Perfect fit and finish
  • 4- and 5-ply heavy-duty silicone couplers
  • Spring-loaded constant tension clamps
  • Combine with Banks 3.5" or 4" Monster Ram for maximum power.
  • Works with stock intercooler or aftermarket intercooler with stock inlet and outlet size and location

Details:  

  • Diameter: 3.5"
  • Material: Aluminized Steel
  • Finish: Red powder-coated

 

Larger Diameter (hot side):  

  • Banks: 3.5 inch (65 percent greater flow area)
  • Stock: 2.75 inch

Larger Diameter (cold side):  

  • Banks: 3.5 inch (37 percent greater flow area)
  • Stock: 3 inches

Banks hot side has 65% greater   flow area than OEM hot side.
Banks cold side has 37% greater   flow area than OEM cold side.

Better flowing intercooler tubes results in less boost pressure loss allowing for more air and fuel to be delivered to your engine resulting in maximum horsepower.

This kit is designed to work with the stock intercooler (or aftermarket intercooler with stock inlet and outlet size and location).

NOTE: Hot side tube will not fit with GBE Airbox older than Rev E (see notes in description). Must have OEM Airbox or Rev E GBE airbox. All airboxes prior to Rev E do not have revision label. If your GBE airbox does not have a revision label, it will not fit with the GBE OEM replacement boost tube.

 

View AllClose

0 Reviews

View AllClose