null
CRAZY CARL'S TURBOS

CRAZY CARLS TURBOS STOCK 2/3 TWIN TURBO KIT W/472 (94-98 RAM)

(No reviews yet) Write a Review
SKU:
94-98STOCK23RDTURBOKIT472
MPN:
94-98STOCK23RDTURBOKIT472
Shipping:
Calculated at Checkout
  • Cold side tubing is 14-gauge 409 stainless steel. Hot pipe is 16-gauge mild steel or optional schedule 10 304 stainless steel, either with 1/2" stainless steel flanges. Down pipe and intake pipe are 16-gauge aluminized steel.
  • CRAZY CARLS TURBOS STOCK 2/3 TWIN TURBO KIT W/472 (94-98 RAM)
$2,550.00

Description

These kits take the guess work out of selecting the right combo and perform amazing.No more staring at your EGT gauge or smoking out the neighborhood. Get better MPGs from increased efficiency as well. These kits are easy to install and a joy to drive.

This is our new 2/3 kit for 94-98 12V Dodge Cummins. It makes adding a second compound (twin) turbo easy. You use your stock turbo, and we supply the rest. These kits take the guess work out of selecting the right combo and perform amazing. No more staring at your EGT gauge or smoking out the neighborhood. Get better MPGs from increased efficiency as well. These kits are easy to install and a joy to drive. You do not have to move your AC, batteries, or even the auto heat exchanger! Get tire roasting, load pulling, worry free performance right out of the box!

Exhaust Manifold: 12Vs require an aftermarket 12V manifold. If you do not have one, see options available above. NOTE: Steed Speed Manifolds do not work with an HX35 in this kit.

*head studs and transmission/clutch upgrades are recommended to match available power range.

Includes all parts needed (see list), PLUS a new Borg Warner S472/83/1.10 T6 turbo. This turbo pairs ideally with your stock turbo, and with proper fueling is rated from stock up to 600hp. Great for street or towing.

Kit includes:
1-piece metal cold pipe,
Intercooler pipe,
Full 5" intake pipe,
4" or 5"* down pipe,
Stainless top and bottom turbo oil feed lines,
Top and bottom turbo oil drain lines,
Billet block or pan drain fitting,
Bottom turbo support bracket,
Top turbo spacer plate,
Quality name-brand large high flow filter,
SS Vband clamps,
SS T-bar clamps,
Quality powder-coating - choose from more than a dozen colors
Gaskets, hardware and basic instructions.

As you'd expect, 5 inch downpipes are an exact fit. Due to variations in trucks you may need need to modify your firewall slightly.

 

NOTES:

 

  • SPRING GATE: If you are using an HX35 that is off a newer 99-02 truck with a compressor mounted waste-gate, you will need to order our spring gate controller.
  • DOWNPIPE: As you'd expect, 5 inch downpipes are an exact fit. Due to variations in trucks you may need need to modify your firewall slightly.
  • EXHAUST MANIFOLD: Kit requires an aftermarket 12V manifold- will not work with stock 12V manifold. Does not work with a Steed Speed manifold in this turbo (HX35) configuration.

 

***These kits are custom made to order and may take several days to ship.*****

 

View AllClose

0 Reviews

View AllClose